야마하 24채널 믹서기 > AV장터

Yamaha 프로급 믹서 MC2404 II‎ 입니다.


사용빈도 적어 내외관상태 신품수준정도로 좋음


기능이상없음 저렴히양도 ==75 =====> 70


대구직  화물택배가능 (스피커랑 교환도가능)

 
공일공-칠5육1-공5일7


Balanced XLR Connectors
Balanced XLR connectors on all primary input and output channels for complete compatibility with virtually all professional equipment.
8 Mixing Busses
4 program, 2 echo, and 2 foldback and a stereo master buss.
Insert Match Points
Insert match points on all input channels and program busses offer maximum flexibility.
Input Channel Equalizers
Input channel equalizers offer a full 15dB of filtering in 3 bands with a sweepable midrange control for extra fine EQ control.
On/Off Switches
On/Off switches on all input channel greatly simplify channel punch-in/out operation.
Phantom Power Supply
Provides 4 input channel selections for ease and convenience when using phantom-powered microphones.
Cue System
A sophisticated cue system allows operator to monitor via headphones all inputs, busses, and/or effects without altering or interrupting mix.
Switchable Pads and Gain Controls
Switchable pads and gain controls on all channels allow channel sensitivity to be set to accept microphones, electrical instuments, or output from nearly any signal processing equipment.
Illuminated VU Meters
Illuminated, highly precise VU meters are switchable to provide accurate monitoring of program, foldback, echo, and stereo mixing busses. Independent meters are featured for each buss; built in peak LEDs indicate high level peaks to avoid even momentary distortion.
Peak LEDs on Each Channel
Peak LEDs on each channel light whenever post-EQ/prefader signal comes within 3 dB of clipping.
Sophisticated Talkback System
Permits total communication between operator, crew and performers.
Pan and Group Assignment Switches
Pan and Group assignment switches on all inputs and allow channel signals to be either independently assigned to one of the program busses or simultaneously panned between groups 1 & 2, and 3 & 4.
Rugged Construction
Rugged construction throughout, and lightweight, compact overall dimensions ideal for both touring and in-house installation.
Frequency Response 20Hz to 20kHz 0 +1/-3 dB (@ 600 ohms + 4db)
THD <0.1% (20Hz to 20kHz @ 600 ohms + 4dB)
Equivalent Input Noise 128dB (Rs 150 ohms)
Residual Noise 95dB
Group Out 86dB GROUP Level Volume (nominal)** All Channel assign switches (off); 64dB GROUP Level Volume (nominal)** One imput fader (nominal)**
Stereo Out 76dB GROUP Fader (max.) All GROUP faders (min.); 64dB GROUP Fader (max.), One input fader and One GROUP fader (nominal)**
FB Out 67dB GROUP Level control (nominal)** All input FB volumes (min.); 62dB GROUP Level control (nominal)** One input FB volume (nominal)**
Echo Send 67dB GROUP Level control (nominal)** All input ECHO volumes (min.); 62dB GROUP Level control (nominal)** One input ECHO volume (nominal)**
Max. Voltage Gain INPUT-GROUP OUT 76dB; INPUT-STEREO OUT 76dB; INPUT-FB OUT 76dB; INPUT-ECHO SEND 82dB; ECHO RTN-GROUP OUT 12dB; TALKBACK INPUT-GROUP OUT 66dB; GROUP SUB IN-GROUP OUT 6dB; FB SUB IN-FB OUT 6dB; ECHO SUB IN-ECHO SEND 6dB
Equalizer Characteristics LOW-EQ +/- 15dB (100Hz Shelving); MID-EQ +/- 14dB (350Hz to 5kHz Peaking); HIGH-EQ +/- 15dB (10kHz Shelving)
Crosstalk (1kHz) MIXBUS to MIXBUS <-60dB; INPUT Channel to INPUT Channel <-60dB
VU Meter GROUP 1 to 4, FB 1.2, ECHO 1.2, STEREO L.R.
Peak Indicator INPUT (Red) Lights 3dB below clipping; VU (Red) Lights 8dB above OVU
Power Requirements US. & Canadian models 120V 60Hz; General Model 110V to 120V/220V to 240V 50/60Hz
Dimensions (W x D x H) 1,232mm x 185.5mm x 654.3mm (48 1/2" x 7 5/16" x 25 3/4")
Wieght 34kg (74 lbs 13 oz)

[이 게시물은 최고관리자님에 의해 2019-01-06 20:42:05 악기장터에서 이동 됨]