판매완료 하이파이스테이 아나로그 스테빌라이저
페이지 정보
작성자![no_profile](https://odoo.co.kr/img/no_profile.gif)
본문
판매가격 : 원
(휴대폰 본인인증 완료)
회원가입일 : 2006-06-19 (6643 일)
최종접속일 : 2024-08-24 13:47:38
광주 아르페지오 오디오샵입니다.
(휴대폰 본인인증 완료)
회원가입일 : 2006-06-19 (6643 일)
최종접속일 : 2024-08-24 13:47:38
광주 아르페지오 오디오샵입니다.
하이파이스테이 제작 아나로그 스테빌라이저 입니다.
알루미늄 이노다이징과 압축 강화목 제질로 처리되어 있어 진동방지와 디스크 안정성에 탁월한 효과를 보여줍니다.
수평계가 내장되어 있으며 불필요시 분리사용 가능합니다.
아나로그의 더욱 깊고 풍성한 재생음을 만들어주는 제품입니다.
ST-112제품은 14만원 ST-11제품은 10만원에 판매 합니다.
광주지역 직거래 가능하고 전국택배 가능합니다.
011-9615-1858
poohlover4364@hanmail.net
***ST-11***
* 재질 / 알미늄 .3mm 60/40 자작나무
* 규격 / 지름79/ 37mm 무개 300g
* 환봉 알미늄/ 다이야몬드 바이트 절삭 가공 /경질 아노다이징
** 플레터 중심핀 0.01 허용공차로 유격이 없음
수평계 (삽입공차 0.01) 분리로 세부적인 수평조절
자작나무 링은 마찰 저항에 발생된 진동흡수 목적 ?
http://www.audiogon.com/cgi-bin/cls.pl?anlgtabl&1235570713&/Hifi-Pyon-Stb11-Record-clamp---New
Description (Hifi Pyon Stb11 Record clamp - New)
Here is a quality record clamp, the STB11 LP Stabilizer for analogue LP lovers.
It is made of and precision milled from a solid duralumin block, employing a diamond bite cutting machine.
On the bottom, a Finnish Birch Wood circular plate is inserted to control resonance.
On the top, a precision level is equipped to display levelness of the turntable platter.
The level can be slide out to use and check the levelness of other things such as a cartridge head shell.
** Specification **
* Size : Diameter 79mm(3.11 in), Height 37mm (1.46 in)
* Weight : 300 grams (0.66 lbs)
Price : US$100.00
***ST-112***
* 재질 / 알루미늄 경질 아노다이징/ 250톤 압축 강화목
* 지름 78 / 40mm 무게 240g
** 플레터 중심핀 0.01 허용공차로 유격이 없음
수평계 (삽입공차 0.01) 분리로 세부적인 수평조절
-- 색상 블랙/ 갈색 ---
http://www.audiogon.com/cgi-bin/cls.pl?anlgtabl&1235294734&/Hifi-Pyon-Stpw112-LP-Stabilizer--best
Description (Hifi Pyon Stpw112 LP Stabilizer, best)
I am selling a joyful addition for LP Record Analogue Lovers.
Every turntable owners would have fun with playing around with sound-improving accessories.
Here I have an exquisitely precision made turntable accessory, a LP STABILIZER record clamp.
Here in South Korea, a music loving master artisan made a luxuriously pretty looking LP stabilizer record clamp.
This special LP Stabilizer works to press down a LP to the turntable platter as well as absorb resonances and vibrations from a turning LP, stabilizing the LP record from resonance. Thus, this device is named as the LP Stabilizer.
(Most record clamps in the market are designed only to press down a LP record using weight or fastening.)
(When unnecessarily excessive weight is applied, a LP record becomes warped and/or its rim raised and then the LP record looses optimum contact to the turntable platter)
The LP Stabilizer is made to weigh 250 grams (0.55 lbs).
This weight is carefully decided not to cause a LP record warping or the record rim raised, but only press down the LP record to closely adhere to a turntable platter.
The LP stabilizer is made of highest quality materials.
The knob is made of and milled from an aero-grade aluminum block and finished shiny gloss look.
The bottom LP-pressing disk is made of the 250-ton super-compressed Finnish Birch wood plates (4 times more expensive material than Umpinggo Ebony wood) and super-fine polished.
And then the wood section is garnered with a radiating supreme lacquer finish.
The center hole on the bottom is ultra-precision drilled with 0.01mm tolerance.
When you place the LP stabilizer on your turntable, you can feel the smoothly tight fit with the LP-holding center pole of the platter.
When placed on a turntable platter, only wood bottom contacts the surface of a LP record in order to absorb and dissipate resonance and vibration from a turning LP record. (The metal part does not touch the LP record surface except the platter center pole)
As you can see in the photos, the LP stabilizers are in two color styles.
One is brown tone which shows the wood texture and is in a transparent piano lacquer finish.
The other is black tone which is in a black piano lacquer finish.
On the top, there is a mini round precision level to check the levelness of the turntable and the platter. Better yet, the mini level can be detached from the LP stabilizer by sliding out.
You can use the mini level to check the levelness of other things such as a cartridge head shell.
** Specification **
* Width (Diameter) : 78mm (3.1 in) (a little smaller than the LP record center label)
* Height : 36mm (1.4 in)
* Weight : 250grams (0.55 lbs)
Price : US$150.00
** Parka Wood Introduction**
The Parkawood(TM) is the hardened layer wood which is made of compressed thin plates of the Finnish Birch wood.
Production process is:
1. Prepare and naturally dehydrate the Finnish Birch wood veneer plates for thirty days in a dry room.
2. Sort out and select proper veneer plates by carefully screening proper shape and pattern (at this stage, deformed plates are screened out and discarded)
3. Accumulate the selected veneer plates by 90-degree crossing the pattern and texture direction of each veneer plate
4. Apply a bakelite solution between veneer plates
5. Steam-pressurize the accumulated veneer plates with 250-ton press weight and naturally dehydrate for one week.
6. When pressurized, the thickness decreases by two third of the original thickness.
(The original single plate thickness of 0.9mm decreases to 0.6mm)
7. The final product of the Parkawood(TM) is harder in solidity but lighter in weight than duralumin (aero-grade aluminum).
8. Since the hardened layer wood of the Parkawood(TM) is proper for versatile shape cutting work, it is exclusively used for ultra-expensive precision instruments and aircraft materials.
9. Although compressed and hardened, the internal structure of the Parkawood(TM) preserves the dense connective fiber tissue structure that is best suited to absorbing and dissipating resonances and vibrations.
10. The Parkawood(TM) is arguably the best resonance-control material for audio equipment application.
알루미늄 이노다이징과 압축 강화목 제질로 처리되어 있어 진동방지와 디스크 안정성에 탁월한 효과를 보여줍니다.
수평계가 내장되어 있으며 불필요시 분리사용 가능합니다.
아나로그의 더욱 깊고 풍성한 재생음을 만들어주는 제품입니다.
ST-112제품은 14만원 ST-11제품은 10만원에 판매 합니다.
광주지역 직거래 가능하고 전국택배 가능합니다.
011-9615-1858
poohlover4364@hanmail.net
***ST-11***
* 재질 / 알미늄 .3mm 60/40 자작나무
* 규격 / 지름79/ 37mm 무개 300g
* 환봉 알미늄/ 다이야몬드 바이트 절삭 가공 /경질 아노다이징
** 플레터 중심핀 0.01 허용공차로 유격이 없음
수평계 (삽입공차 0.01) 분리로 세부적인 수평조절
자작나무 링은 마찰 저항에 발생된 진동흡수 목적 ?
http://www.audiogon.com/cgi-bin/cls.pl?anlgtabl&1235570713&/Hifi-Pyon-Stb11-Record-clamp---New
Description (Hifi Pyon Stb11 Record clamp - New)
Here is a quality record clamp, the STB11 LP Stabilizer for analogue LP lovers.
It is made of and precision milled from a solid duralumin block, employing a diamond bite cutting machine.
On the bottom, a Finnish Birch Wood circular plate is inserted to control resonance.
On the top, a precision level is equipped to display levelness of the turntable platter.
The level can be slide out to use and check the levelness of other things such as a cartridge head shell.
** Specification **
* Size : Diameter 79mm(3.11 in), Height 37mm (1.46 in)
* Weight : 300 grams (0.66 lbs)
Price : US$100.00
***ST-112***
* 재질 / 알루미늄 경질 아노다이징/ 250톤 압축 강화목
* 지름 78 / 40mm 무게 240g
** 플레터 중심핀 0.01 허용공차로 유격이 없음
수평계 (삽입공차 0.01) 분리로 세부적인 수평조절
-- 색상 블랙/ 갈색 ---
http://www.audiogon.com/cgi-bin/cls.pl?anlgtabl&1235294734&/Hifi-Pyon-Stpw112-LP-Stabilizer--best
Description (Hifi Pyon Stpw112 LP Stabilizer, best)
I am selling a joyful addition for LP Record Analogue Lovers.
Every turntable owners would have fun with playing around with sound-improving accessories.
Here I have an exquisitely precision made turntable accessory, a LP STABILIZER record clamp.
Here in South Korea, a music loving master artisan made a luxuriously pretty looking LP stabilizer record clamp.
This special LP Stabilizer works to press down a LP to the turntable platter as well as absorb resonances and vibrations from a turning LP, stabilizing the LP record from resonance. Thus, this device is named as the LP Stabilizer.
(Most record clamps in the market are designed only to press down a LP record using weight or fastening.)
(When unnecessarily excessive weight is applied, a LP record becomes warped and/or its rim raised and then the LP record looses optimum contact to the turntable platter)
The LP Stabilizer is made to weigh 250 grams (0.55 lbs).
This weight is carefully decided not to cause a LP record warping or the record rim raised, but only press down the LP record to closely adhere to a turntable platter.
The LP stabilizer is made of highest quality materials.
The knob is made of and milled from an aero-grade aluminum block and finished shiny gloss look.
The bottom LP-pressing disk is made of the 250-ton super-compressed Finnish Birch wood plates (4 times more expensive material than Umpinggo Ebony wood) and super-fine polished.
And then the wood section is garnered with a radiating supreme lacquer finish.
The center hole on the bottom is ultra-precision drilled with 0.01mm tolerance.
When you place the LP stabilizer on your turntable, you can feel the smoothly tight fit with the LP-holding center pole of the platter.
When placed on a turntable platter, only wood bottom contacts the surface of a LP record in order to absorb and dissipate resonance and vibration from a turning LP record. (The metal part does not touch the LP record surface except the platter center pole)
As you can see in the photos, the LP stabilizers are in two color styles.
One is brown tone which shows the wood texture and is in a transparent piano lacquer finish.
The other is black tone which is in a black piano lacquer finish.
On the top, there is a mini round precision level to check the levelness of the turntable and the platter. Better yet, the mini level can be detached from the LP stabilizer by sliding out.
You can use the mini level to check the levelness of other things such as a cartridge head shell.
** Specification **
* Width (Diameter) : 78mm (3.1 in) (a little smaller than the LP record center label)
* Height : 36mm (1.4 in)
* Weight : 250grams (0.55 lbs)
Price : US$150.00
** Parka Wood Introduction**
The Parkawood(TM) is the hardened layer wood which is made of compressed thin plates of the Finnish Birch wood.
Production process is:
1. Prepare and naturally dehydrate the Finnish Birch wood veneer plates for thirty days in a dry room.
2. Sort out and select proper veneer plates by carefully screening proper shape and pattern (at this stage, deformed plates are screened out and discarded)
3. Accumulate the selected veneer plates by 90-degree crossing the pattern and texture direction of each veneer plate
4. Apply a bakelite solution between veneer plates
5. Steam-pressurize the accumulated veneer plates with 250-ton press weight and naturally dehydrate for one week.
6. When pressurized, the thickness decreases by two third of the original thickness.
(The original single plate thickness of 0.9mm decreases to 0.6mm)
7. The final product of the Parkawood(TM) is harder in solidity but lighter in weight than duralumin (aero-grade aluminum).
8. Since the hardened layer wood of the Parkawood(TM) is proper for versatile shape cutting work, it is exclusively used for ultra-expensive precision instruments and aircraft materials.
9. Although compressed and hardened, the internal structure of the Parkawood(TM) preserves the dense connective fiber tissue structure that is best suited to absorbing and dissipating resonances and vibrations.
10. The Parkawood(TM) is arguably the best resonance-control material for audio equipment application.
댓글목록
등록된 댓글이 없습니다.