매킨토시 MHA-100 인티/헤드폰앰프 > 전문장터

매킨토시 MHA-100 인티/헤드폰앰프입니다.
실물사진입니다.

소유욕을 자극하는 아름다운 글래스 패널에 탁월한 설계에서 기인하는 내구성과 근육질의 안정된 매킨토시 사운드를 즐길수 있는 헤드폰앰프겸 인티앰프입니다.
PC파이를 위한 AES/EBU,Coaxial,Optical,USB등 디지털 입력을 지원하는 DAC가 내장되어있고 아나로그 입력은 밸런스 언밸런스 각 1조씩 지원합니다.
헤드폰단자는 최적의 임피던스 매칭이 가능하며, 스피커출력은 50와트로 고성능 북셀프 스피커와 함께 좁은 데스크 환경에서 최적의 하이파이를 구성할수 있습니다.

정식수입 220볼트, 원박스및 부속물 모두 있으며, 상태 신품수준입니다.
판매가는 송료포함 430만원입니다.
광주지역 직거래 가능하고 택배 가능합니다.

010-8615-1858
poohlover4364@hanmail.net

Headphone Power Output
High Selection: 1W  Normal Selection: 250mW
Headphone Output Impedance 8-40 Ohms 40-150 Ohms 150-600 Ohms

Electronic Specifications

Power Output per Channel 50 Watts
Speaker Impedance 8 Ohms
Rated Power Band 20Hz to 20kHz
Total Harmonic Distortion 0.005%
Intermodulation Distortion 0.005% maximum, if the instantaneous peak power is 100 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20kHz
Dynamic Headroom 1.5dB
Frequency Response +0, -0.5dB from 20Hz to 20kHz +0, -3dB from 10Hz to 100kHz
Sensitivity (Unbalanced) 300mV
Sensitivity (Balanced) 600mV
Maximum Input Signal (Unbalanced) 8V
Maximum Input Signal (Balanced) 16V
Signal To Noise Ratio 105dB
Input Impedance (Balanced / Unbalanced) 25K/25K
Damping Factor >150
Preamplifier Output 3V (8V maximum)
Preamplifier Output Impedance 500 Ohms
Voltage Gain 36.5dB
Power Guard <2% THD with up to 16dB overdrive at 1kHz

Connectivity

Headphone Output 1/4" High Drive with Headphone Crossfeed Director (HXD®)
Balanced Input 1
Unbalanced Input 1
Digital AES/EBU Input 1
Digital Coaxial Input 1
Digital Optical Input 1
Digital USB Input 1
Preamplifier Output 1

Digital Audio Specifications

Digital AES/EDU Input Sample Rate16-bit, 24-bit - 32kHz to 192kHz
Digital Coaxial Input Sample Rate16-bit, 24-bit - 32kHz to 192kHz
Digital Optical Input Sample Rate16-bit, 24-bit - 32kHz to 192kHz
Digital MCT (DIN) Input Sample Rate N/A
Digital USB Input Sample Rate16-bit, 24-bit, 32-bit - 32kHz to 192kHz

Control

Tone Controls 5 Step Bass Boost Control: 0 to +12.5dB (in 2.5dB steps) @ 40Hz
Power Control Input 1
Power Control Output 1

General Specifications

Output Meters Yes
Vacuum Tube or Solid State Solid State
Power Requirement 120V 50/60Hz, 1.5A
Standby Power Requirement <0.25 Watts
Output Autoformer Yes for Headphones

Weights & Dimensions

Dimensions (W x H x D) 11-1/2" (29.2cm) x 5-9/16" (14.1cm) x 18" (45.7cm)
Weight 26.5 lbs (12 kg)
Shipping Weight 32.5 lbs (14.8 kg)