오디오리서치 CD3 시디피 > 전문장터

오디오리서치 CD3 플레이어입니다.
실물사진입니다.

필림스 PRO 2 메커니즘과 24BIT 델타시그마 DAC를 탑재한 오디오리서치의 중급 시디플레어입니다.
최상급 드라이브 메커니즘에 의한 안정감있는 재생과 진공관 향기가 매우짙은 다채로운 표현력과 품위있는 사운드를 들을수 있습니다.

정식수입 220볼트, 상태 극상입니다.
판매가는 송료포함 330만원입니다.
광주 직거래가능하고 전국택배 가능합니다.

011-9615-1858
poohlover4364@hanmail.net

•픽업 메커니즘 : 필립스 Pro2
•DA변환부 : 24비트 델타시그마 DAC
•아날로그 신호 출력단자 : 언밸런스 1계통(RCA) 밸런스 1계통(XLR)
•아날로그 출력레벨(최대) : 2.7V(언밸런스), 5.4V(밸런스)
•디지털 신호 출력단자 : 동축 1계통(BNC), AES/EBU 1계통(XLR)
•디지털 출력레벨 및 임피던스 : 0.7V/75Ω(BNC), 4V/110Ω(XLR)
•크기:(W)48.3 X (H)13.3 X (D)31.1cm
•무게:11.3kg

Specifications

Frequency response 0.5-20,000Hz ± +0 -.1dB
Distortion -.025% 1kHz
S/N ratio 96 dBA
Phase linearity 
Channel separation 92dB 1kHz
Resolution 24 BIT DELTA-SIGMA DAC (Crystal Semiconductor 24/192 DAC)
Output impedance (Analog) 400 ohms BAL, 200 ohms SE
Analog outputs Balanced XLR 5.4V RMS (+14.6dBv) max
  Single-Ended RCA 2.7V RMS (+8.6dBv) max
Digital outputs XLR Balanced AES/EBU 110-ohm 4V P-P
  BNC coax SPDIF 75-ohm 0.7V P-P
Drive mechanism Philips CDM Pro2 cast metal transport mechanism.
  Optical pickup: 3-beam LDGU (Laser Diode & Grating Unit), with holographic diffraction light pen
Laser: GaAIAs semiconductor, 780nm, 0.5mW maximum output
Servo: Digitally-controlled low-inertia linear positioning actuator
Wow & flutter: Unmeasureable (Quartz stability)
Jitter reduction: High-stabillity crystal-controlled re-clocking for all outputs
Discs: Accepts 5" (12cm) and 3" (8cm) sizes
Display: Six-digit vacuum fluorescent, with optical filter
Power requirements 100-135VAC 60Hz (200-270VAC 50/60Hz), 40 watts maximum. (26 watts standby)
Other Detachable power cord
Quantization Bit: 16bit linear per channel.
Channel bit rate: 4.3218Mb/sec
Channel modulation code: EFM (8 -14 modulation)
Error correction: CIRC (cross interleave Reed Solomon Code)
Compliance: RF Interference complies with FCC and CE MARK
It is better to leave it plugged into a live outlet at all times for best sonics. After plugging it into a live outlet, the CD3 (like the CD2) will mute its output for approximately 45 seconds as the unit stabilizes.
The power cord is a grounded three pin 14 gauge cord with detachable IEC connector.
Proprietary, self centering magnetic clamp.

Dimensions 19" (48 cm) W x 5.25" (13.4 cm) H x 12.25" (31.1 cm) D. Handles extend 1.50" (3.8 cm) forward of the front panel. Rear connectors extend .75" (1.9 cm)
Weight 25 lbs. (11.4 kg) Net; 35 lbs. (15.9 kg) Shipping.